Your browser is no longer supported. Please upgrade your browser to improve your experience.

Service announcement

miniIPS

The miniIPS is a precision underwater pressure sensor; 0.01% accuracy, a titanium housing and a choice of pressure ranges make it a cost-effective solution for offshore engineers, vehicle pilots and other operators who require highly accurate depth information in real-time.

The miniIPS is also compatible with Valeport’s MIDAS BathyPack and BathyLog software, allowing the depth data to be continually updated for Density variations in the water column.

Support

miniIPS Datasheet
Download
miniIPS Operating Manual
Download
Technical drawings

Software

DataLog X2
1.1.0.1315
Download
BathyLog
F1
Download

Technical Specifications

Pressure Sensor

The pressure sensor fitted to the miniIPS is a temperature
compensated piezo-resistive sensor, which delivers the performance
previously only available from a resonant quartz sensor at a more
cost-effective price.
It also brings the added advantages of long-term stability, allowing
longer intervals between calibration, and a smaller and more robust
construction; complex and vulnerable arrangements of diaphragms
and oil filled capillaries & reservoirs are therefore no longer
necessary.

Type:
Temperature compensated piezo-resistive
Range:
10, 20, 30, 50, 100, 200, 300, 400 or 600 Bar
Accuracy:
±0.01% FS
Resolution:
0.001% FS

Data Acquisition

Data Acquisition
Continuous, burst average or data on demand.
Data Rate:
1, 2, 4, 8 or 16Hz continuous, down to 1 sample
per day bursting
Units:
Secondary calibration function allows conversion
of dBar pressure units into metres or feet, or other
required units
Tare:
Tare Function allows correction for atmospheric
offset

Physical

Housing:
Titanium (6000m rated)
Size:
40mmØ x 185mm (including connector)
Weight:
<1kg (air)
Connector:
SubConn MCBH6F (titanium)
(other connector available on request)
Shipping:
36 x 29 x 16cm, 2kg

Communications

Output:
RS232 & RS485 fitted as standard
Protocol:
4800 to 115200 baud, (8,1,N)
Format:
ASCII text Data format compatible with Valeport’s
BathyLog software, allowing real time depth
correction using Density Profiles

Power Requirements

Input:
9 – 28V DC (isolated)
Power:
less than 0.4W (40mA @ 12V DC)

Ordering

0760001- XX
miniIPS
Fitted with:
· 0.01% piezo-resistive sensor
Supplied with:
- Interface lead
- Operating manual and transit case
Note:
XX denotes pressure transducer range.
Select from 10, 20, 30, 50, 100, 200, 300, 400 or 600 Bar
0760005- XX
miniIPS – OEM remote sensor
Fitted with:
· 0.01% piezo-resistive sensor
· OEM remote sensor with PCB
· Operating manual and transit case
Note:
XX denotes pressure transducer range.
Select from 10, 20, 30, 50, 100, 200, 300, 400 or 600 Bar
0760002
Calibration adapter to allow users to perform their
own calibration against a deadweight tester

Product Enquiry

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Related Products

miniIPS2

The smart miniIPS2 underwater pressure sensor with accuracy to 0.01%, offers a cost-effective solution to vehicle pilots who require highly accurate depth information in real-time.

miniCT

Consistent performance and stability under extreme pressure come as standard with the miniCT probe.

miniSVS Sound Velocity Sensor

The Valeport miniSVS uses digital "time of flight" technology to provide the lowest noise, highest accuracy, best resolution sound velocity data available.