Your browser is no longer supported. Please upgrade your browser to improve your experience.

Model 002 Flowmeter

Ease of operation makes the Valeport ‘Braystoke’ Model 002  flowmeter ideal for field study use and an invaluable tool for hydrometric work.

Ease of operation makes the Valeport ‘Braystoke’ Model 002  flowmeter ideal for field study use and an invaluable tool for hydrometric work.

It provides a cost-effective and reliable method of monitoring flow in a variety of environments, including salt, fresh and effluent water, from shallow streams to tidal waterways. The meter benefits from the design of the impeller bearings, which give low threshold velocity and consistent performance. Available as either wading or a suspension set, all systems are supplied with the Model 0012B real-time control display unit.


Model 002 Datasheet
Model 002 Operating Manual
CDU Express Operating Manual


CDU Express

Technical Specifications


1178 series High Impact Styrene Impeller
50mm diameter by 100mm pitch
0.046 to 5m/s
±2.5% of reading above 0.5m/s
±0.01m/s below 0.5m/s

The smaller Model 002 does have one major advantage over the Model 001:

· Since the impeller is smaller, it may be used successfully in very shallow water
- provided the impeller is submerged, it will operate correctly. Both impellers feature water lubricated PTFE bearings, requiring no oil for correct use, and a unique design that inhibits silt and weed from entering the bearings, allowing use in a wide variety of environments.


Both instruments are offered as standard with a “Group Calibration”, according to BS ISO 2537:2007.
Within limits, the performance of an impeller is primarily a function of its shape, provided that its bearings work and it is spinning freely. Since all our impellers are manufactured to the same standard shape, we guarantee that they fall within the tolerances of the group calibration, as given above.
Note that the Group Calibration for each impeller is up to 3m/s - calibration above 3m/s is by linear extrapolation. Specific calibration of any individual impeller may be performed on request, at Valeport’s own premises up to 1m/s, or through a third party for higher speeds.

Data Acquisition

The Model 002 Flowmeter is supplied with a dedicated surface display unit, the Model 0012B. As the impeller rotates, it opens and closes a magnetic reed switch, generating pulses. The Model 0012B measures the frequency of these pulses, and uses the calibration equation to calculate speed of flow from the pulse frequency.
Data may be averaged over any number of seconds from 1 to 600, or according to number of impeller revolutions. The Model 0012B will display real time speed data, as well as the result of the data average, together with a Standard Deviation figure to give added data confidence. A solid-state memory records all results, and the data may be downloaded to PC using the RS232 interface lead supplied.


Wading Set
Designed for hand held use, with the operator standing in the channel, holding the instrument in position. The system is supplied with 1.5m wading rod (3x 0.5m sections), graduated in cm, and a 2m cable from instrument to display unit. Alternatively, a “top-setting” wading rod system is available, which allows the vertical position of the instrument to be set without removing the wading rods from the water.
Suspension Set
Designed for hand suspension use, with the operator lowering the instrument on a cable into deeper water or from a high bridge. System includes a 35m suspension cable, together with an extended tail fin for ensuring that the instrument is aligned into the water flow. A range of streamlined weights is also
available to aid suspension deployments - contact Valeport for details. Also available is a “Conversion Kit”, which contains all the necessary additional parts to allow a Wading Set to be used as a Suspension Set.


System is supplied with CDU Express Windows based PC software, for data extraction from display unit. CDU Express is licence free.


Model 002 Wading Set
Model 002 Suspension Set
Model 002 Conversion Kit
Top Setting Wading Rods

Product Enquiry


Related Products